 |
Projects

|
 |
City of Austin Pilot Knob Reservoir Improvements |
Recently Awarded to Blastco Texas Inc.
- Rehabilitation of an 11 MG steel reservoir (209’ diameter by 40’ high)
- Interior coating replacement with 100% solids polyurethane lining
- Exterior coating replacement with a zinc/polysiloxane system
- Structural steel upgrades
- Safety upgrades
- Concrete valve vault modifications
- Storm sewer/drainage improvements
- Improvements to retention pond
- Electrical improvements
- New CPS
- Piping and mechanical upgrades
|
| |
Southwest ISD Standpipe Improvements |
|
Recently Awarded to Blastco Texas Inc.
- Rehabilitation of a 350,000 gallon standpipe (20’ diameter by 150’ high)
- Interior/exterior coating replacement
- Structural steel repairs including complete floor replacement
- New on site water line
- New site storm drain
- New logo
|
|

|
 |
3mm gallon elevated water storage tank |
|
3mm gallon elevated water storage tank for the city of Dallas. This job consisted of blasting the 63,000 sq.ft interior and applying a 10 mil 99.97% zinc metalizing lining system. It is the first of its kind in the southern United States using the very long life metalizing system. |
Lower Colorado River Authority Coal fired power plant |
|
Blastco is relining the failed reinforced vinylester system for the Lower Colorado River Authority's coal fired power plant at the Flue Gas Desulphurization facility in LaGrange, TX. We are using a Plasite 4301 glass reinforced system at 40 mils dft. The original system lasted for over 10 years but became fatigued by chemical and thermal attack from normal operation. |
|

|
This tank was recently completely recoated. Location required a complete enclosure to contain dust and overspray.
Rehab of the City of Nederland 500,000 gallon EST
- Steel repairs and upgrades
- Complete exterior coating removal (SSPC-SP6)
- 100% containment during blasting and painting operations
- Epoxy primer and intermediate with Polysiloxane top coat
- City and football team logos installed on tank
|
 |
| |
Storage Tank, Victoria Texas |
|
|
 |
 |
| Rehabilitation of 1 MG Elevated Storage Tank Interior/Exterior coating replacement – 100% solids applied to interior Structural steel repairs, mechanical upgrades and safety improvements. |

|
- Erected 100% containment structure for blasting, restoring concrete and applying lining
- Applied 100% solids elastomeric polyurethane at 100 mils DFT
- The work was completed on campus in Austin, TX with no disruption to any operations.
- The lining was installed to prevent leaks through the concrete into building below
- The basins were on top of operations buildings
- All equipment and rigging had to be lifted in with a 70 ton crane.
|
 |
- Three (3) 150,000 gallon elevated storage tanks.
- Pack Unit - Navasota, TX
- Luther Unit - Navasota, TX
- Hilltop Unit - Gatesville, TX
- Interior/exterior coating 100% removal and replacement
- Structural steel repairs and safety upgrades
- Variable Frequency drives were permanently installed so the elevated storage tanks could be by-passed for these projects and any other future projects that required the tanks to be drained and removed from service.
|
 |

|
- 11 MG Water Reservoir (Steel)
- Major Structural Steel Repairs and safety upgrades
- Electrical upgrades and replace Impressed current Cathodic Protection system
- Interior – blast to SSPC-SP10 and apply 100% solids polyurethane lining at 30mils DFT to over 140,000 SF of interior surface area
- Exterior- blast to SSPC-SP6 and apply zinc, epoxy urethane and clear coat
- Removed and replaced 12’ by 12’ door sheet to expedite schedule for interior structural repairs, blasting and lining application.
|
 |
| |
Tarsco Tank – Kinder Morgan – Iraan, Texas |
|
- Tank constructed by TARSCO (TF Warren Group Company)
- New 69’ dia by 54’ high cone roof tank
- Apply 2 coats of Epoxy Phenolic to 100% of interior surfaces
- Apply one coat of epoxy and one coat of urethane to exterior
|
 |

|
- Exterior recoat of two (2) elevated storage tanks
- C/W Air Force Logos
|
|
Blast to SSPC-SP10 and apply 100% solids epoxy at 30 mils DFT to the interior of 500’ of 36” underground cooling tower recirculation line.
The cooling tower was shut down and the line had to be cut into for access. This pipe line had not been inspected or coated for over 30 years.
Blastco completed the project ahead of schedule. |

|

Before
|

After |

|
Replacement of Willowchase Pump Station 750,000 gallon Ground Storage Tank and Rehabilitation of a 5 million gallon Ground Storage Tank at the Acres Homes Pump Station.
- Removed an existing 750,000 gallon bolted tank including concrete foundation and abandoned piping
- Removed one 20,000 gallon pressure tank and relocated another complete with new foundation and piping
- Constructed a new pre-stressed concrete 750,000 gallon tank
complete with new piping, electrical upgrades (level gauges, sensors….)
- Rehabilitation of 5 million gallon ground storage tank c/w interior/exterior coating removal and replacement; structural steel upgrades and repairs; mechanical upgrades and repairs including the replacement of a 48” butterfly valve; electrical upgrades; new cathodic protection system; site grading
|
 |
|
Installation of Tideflex mixing systems to three (3) elevated tanks
- Extend 48” riser 6 feet into tank to allow installation of 30” manway for future access
- Install 16” fill pipe on top of riser extension complete with 6 Tideflex mixing valves that will prevent unused water from going stagnant. Install bracing to support fill pipe.
- Remove replace bottom section of riser to allow for hoisting of all materials to the interior of the bowl
- Blast and coat all complements with an NSF approved coating system
|
 |

|
- Complete removal and replacement of lead based coatings on structure 1,500 lin.ft. bridge (over 200,000 squarre feet)
- Traffic tunnel containment had to be erected to avoid complete closure of bridge
- Temporary traffic signals installed to control one lane/two way traffic
- Concrete rehabilitation including through slab removal and replacement
- New concrete sidewalks, spill ways, curbs and gutters
- New crash rail fabricated and designed to match historic riveted construction of bridge
- Resurfacing and Painting of concrete structures c/w anti graffiti top coat
- Electrical upgrades including all new lighting on road deck and bottom of bridge
- New guard rail on 2,000 lin.ft. of approaching highway
|
 |
|
|
|